Mottagare RX-461. 2,4Ghz. Sanwa. Telemetri.

Sanwa RX-461 Telemetri mottagare. Sensorer medföljer inte.

The RX461 (92010) 4-Channel 2.4GHz FHSS-4T Surface Receiver is a Super Response, Telemetry-capable receiver that is used with the Airtronics MT-4 2.4GHz FHSS-4T transmitter. This receiver supports Airtronics Telemetry and features an extremely low latency time and high frame rate, which makes you feel more connected to your model than ever. This receiver works equally well in cars, trucks and boats.

When used with the Airtronics MT-4 4-Channel 2.4GHz FHSS-4T transmitter and the Airtronics Temperature and Speed sensors (available separately), real-time telemetry is now an option.

*This receiver is currently compatible with ONLY the MT-4 4-Channel 2.4GHz FHSS-4T transmitter.

*All Airtronics 2.4GHz FHSS-4T surface receivers now have a Nominal Input Voltage rating of 4.8v ~ 7.4v.

Features:
One-Touch Binding
Single Receiver Antenna
Compatible with Airtronics 2.4GHz FHSS-4T Capable Surface Transmitters (MT-4)
High Frame Rate, Low Latency FHSS-4T Technology
Servo Mode Selectable (Normal, SHR and SSR)
Nominal Input Voltage Up to 7.4v Allows Use of 7.4 Volt Servos

Specs:
Frequency/Modulation Type: 2.4GHz/FHSS-3
Nominal Input Voltage: 4.8v ~ 7.4v
Weight: 9.6g
Dimensions: 36.2 x 26.5 x 16.3mm
Fail Safe: Yes (Programmable on All Channels)
Receiver Battery Fail Safe: Yes (3.8v Default / 3.5v ~ 5.0v Adjustable)
Connector Type: Universal 'Z'

*This receiver has a Nominal Input Voltage rating of 4.8v ~ 7.4v, therefore, it can be powered using a 4 Cell to 6 Cell Ni-Cd or Ni-MH battery pack, or a 2S Li-Po or 2S A123/Li-Fe battery pack. DO NOT USE A 3S Li-Po BATTERY PACK!

*When using a 2S Li-Po battery pack you should NOT use servos rated for 4.8 or 6.0 volts, otherwise damage to your servos could occur. In this case, use high voltage 7.4 volt servos.

*You can use Analog or Digital servos with this receiver. For the best results, we recommend using Digital servos.